[Top] [Prev] [Next] [Contents] [Index]
CALIBTOUCH Messages
CALIBTOUCH messages pertain to the touch screen software support. If you are looking for a message that refers to the CALIBTOUCH module but does not appear here, refer to "Messages Common to All Modules".
NODISPLAY, Could not open display
- Severity:
- Fatal
- Explanation:
- The X server cannot find the X display and the touch screen
support is not operating.
- User Action:
- If you encounter this message, please contact NCD Technical
Support.
NOTOUCH, Could not open touchscreen
- Severity:
- Fatal
- Explanation:
- The X server cannot find the touch screen monitor.
- User Action:
- Make sure that the terminal is configured for touch screen
support. See the User's Guide for specific instructions.
NOXINPUT, extension not present when listing input devices
- Severity:
- Fatal
- Explanation:
- The X server could not find the X Input Extensions.
- User Action:
- Check the terminal's configuration and/or the Console
Messages to make sure that the X Input Extension module (xinput) has been
loaded.
UNKWNCLASS, Unknown class: class
- Severity:
- Warning
- Explanation:
- The input device class is neither Key, Button, nor Valuator. The
touch screen support is probably not operating.
- User Action:
- If you encounter this message, please contact NCD Technical
Support.
[Top] [Prev] [Next] [Contents] [Index]
Send comments, suggestions, or questions about this document to the NCD Technical Publications Department by Internet e-mail. Write to us at
techpubs@ncd.com.
Copyright © 1997, NCD Inc. All rights
reserved.